D-Link xStack Reference Manual page 175

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
individual port or group of ports to exclude one or more of the IEEE 802.1 organizational port VLAN ID TLV data
types from outbound LLDP advertisements.
To view the following window, click L2 Features > LLDP > LLDP> LLDP Dot1 TLVs Settings, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Dot1 TLV PVID
Dot1 TLV Protocol
VLAN
Dot1 TLV VLAN
Dot1 TLV Protocol
Identity
Figure 5-111 LLDP Dot1 TLVs Settings window
Description
Select the switch unit to configure.
Select the port range to use for this configuration.
Use the drop-down menu to enable or disable and configure the Dot1 TLV PVID
option.
Use the drop-down menu to enable or disable, and configure the Dot1 TLV Protocol
VLAN option. After enabling this option, the user can select to use either VLAN
Name, VLAN ID or All in the next drop-down menu. After selecting this, the user
can enter either the VLAN name or VLAN ID in the space provided.
Use the drop-down menu to enable or disable, and configure the Dot1 TLV VLAN
option. After enabling this option, the user can select to use either VLAN Name,
VLAN ID or All in the next drop-down menu. After selecting this, the user can enter
either the VLAN name or VLAN ID in the space provided.
Use the drop-down menu to enable or disable, and configure the Dot1 TLV Protocol
Identity option. After enabling this option the user can select to either use EAPOL,
LACP, GVRP, STP, or All.
174