Chapter 11 Oam; Cfm (Ei Mode Only); Cfm Settings - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Chapter 11

CFM (EI Mode Only)

Ethernet OAM
DULD Settings
Cable Diagnostics
CFM (EI Mode Only)

CFM Settings

On this page the user can configure the CFM parameters.
To view this window, click OAM > CFM > CFM Settings, as shown below:
The fields that can be configured are described below:
Parameter
CFM State
AIS Trap State
LCK Trap State
All MPs Reply LTRs
MD
MD Index
Level
MIP
OAM
Figure 11-1 CFM Settings window
Description
Click the radio buttons to enable or disable the CFM feature.
Click to enable or disable the AIS trap state.
Click to enable or disable the LCK trap state.
Click the radio buttons to enable or disable all MPs to reply LTRs.
Enter the maintenance domain name.
Enter the maintenance domain index used.
Use the drop-down menu to select the maintenance domain level.
This is the control creations of MIPs.
None – Don't create MIPs. This is the default value.
Auto – MIPs can always be created on any ports in this MD, if that port is not
configured with an MEP of this MD. For the intermediate switch in an MA, the setting
500