Adding A Packet Content Acl Profile - D-Link xStack Reference Manual

Xstack ds-3620 series web ui reference guide layer 3 managed stackable gigabit switch

Hide thumbs Also See for xStack:

Table of Contents

DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide

Click the Show All Rules button to navigate back to the Access Rule List.

Adding a Packet Content ACL Profile

The window shown below is the Add ACL Profile window for Packet Content: To use specific filtering masks in this

ACL profile, click the packet filtering mask field to highlight it red. This will add more filed to the mask.

After clicking the Add ACL Profile button, the following page will appear:

The fields that can be configured are described below:

Profile ID (1-6)

Enter a unique identifier number for this profile set. This value can be set from 1 to 6.

Select profile based on Ethernet (MAC Address), IPv4 address, IPv6 address, or packet

content. This will change the window according to the requirements for the type of profile.

Figure 8-17 Access Rule Detail Information (IPv6 ACL) window

Figure 8-18 Add ACL Profile (Packet Content ACL) window

Xstack dgs-3620-28sc