Trusted Host Settings - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
After clicking the View Detail link next to the DoS Type displays, the following window will appear:
Figure 9-84 DoS Attack Prevention Detail window
Click the <<Back button to return to the previous page.

Trusted Host Settings

Up to thirty trusted host secure IP addresses or ranges may be configured and used for remote Switch
management. It should be noted that if one or more trusted hosts are enabled, the Switch will immediately accept
remote instructions from only the specified IP address or addresses. If you enable this feature, be sure to first enter
the IP address of the station you are currently using.
To view this window, click Security > Trusted Host Settings as shown below:
Figure 9-85 Trusted Host window
When the user clicks the Edit button, one will be able to edit the service allowed to the selected host.
The fields that can be configured are described below:
Parameter Description
464