D-Link xStack Reference Manual page 294

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Capability ORF
Prefix List Type
Click the Apply button to accept the changes made.
BGP Neighbor Table
This window is used to display BGP and TCP connections with the BGP neighbor or routing table entries
containing a BGP neighbor. For BGP, this includes detailed neighbor attribute, capability, path, and prefix
information. For TCP, this includes statistics related to BGP neighbor session establishment and maintenance.
To view the following window, click L3 Features > BGP > BGP Neighbor > BGP Neighbor Table, as shown
below:
The fields that can be configured are described below:
Parameter
IP Address
Type
Click the Find button to locate a specific entry based on the information entered.
Click the Delete All button to remove all the entries listed.
Click the View All button to display all the existing entries.
Click the View Detail link to view more information regarding the specific entry.
Click the Delete button to remove the specific entry.
Click the View Detail link to see the following window.
Use to configure an outbound route filter prefix list capability. It can be sent with the
following values:
Receive – Enable the ORF prefix list capability in the receiving direction. The local router
will install the prefix filter list notified by the remote router.
Send – Enable the ORF prefix list capability in the sending direction. The local router will
notify the remote router for the ORF prefix list capability.
Both – Enable the ORF prefix list capability in both received and send directions.
None – Disable the ORF prefix list capability in both received and send directions.
Figure 6-156 BGP Neighbor Table window
Description
Enter the IP address of the BGP speaking neighbor.
Use the drop-down menu to select different types.
None – Select for not specifying the type to display.
Advertised Routes – Select to display the routes advertised to a BGP neighbor.
Received Routes – Select to display the routes received from this neighbor.
Routes – Select to display routes in the routing table learned from the neighbor.
Received Prefix Filter – Select to display the prefix filter information that is received from a
BGP neighbor.
Statistics – Select to display the statistical information learned.
293