D-Link xStack Reference Manual page 499

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Select the Current Unit ID and enter the Current Path string and click the Go button to navigate to the path
entered. Click the Format button to format the root. Click the C: link to navigate the C: drive.
After clicking the C: link button, the following page will appear:
Figure 10-43 Flash File System Setting – Search for Drive window
Click the Previous button to return to the previous page.
Click the Create Directory to create a new directory within the file system of the switch.
Click the Copy button to copy a specific file to the switch.
Click the Move button to move a specific file within the switch.
Tick the List Boot Up Files Only option to display only the boot up files.
Click the Active button to set a specific config file as the active runtime configuration.
Click the Boot Up button to set a specific runtime image or configuration as the boot up.
Click the Rename button to rename a specific file's name.
Click the Delete button to remove a specific file from the file system.
Click the Copy button to see the following window.
Figure 10-44 Flash File System Settings – Copy window
When copying a file to the file system of this switch, the user must enter the Source and Destination path.
Click the Apply button to initiate the copy.
Click the Cancel button to discard the process.
Click the Move button to see the following window
498