Vlan Translation Settings; Vlan Translation Port Mapping Settings - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Add Inner Tag
Click the Apply button to accept the changes made for each individual section.

VLAN Translation Settings

This page can be used to add translation relationship between C-VLAN and SP-VLAN. On ingress at UNI port, the
C-VLAN tagged packets will be translated to SP-VLAN tagged packets by adding or replacing according the
configured rule. On egress at this port, the SP-VLAN tag will be recovered to C-VLAN tag or be striped. The priority
will be the priority in the SP-VLAN tag if the inner priority flag is disabled for the receipt port.
To view the following window, click L2 Features > QinQ > VLAN Translation Settings, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
CVID (1, 5-7)
Action
SVID (1-4094)
Priority
Click the Apply button to accept the changes made for each individual section.
Click the Delete All button to remove all the entries listed.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove a specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

VLAN Translation Port Mapping Settings

Here the user can configure the VLAN translation port mapping settings.
To view the following window, click L2 Features > QinQ > VLAN Translation Port Mapping Settings, as show
below:
Deselect the Disable check box and enter an entry that an Inner Tag will be added to the
entry. By default the Disabled check box is selected.
Figure 5-34 VLAN Translation Settings window
Description
Select the unit you want to configure.
Select a range of ports to use in the configuration.
Enter the C-VLAN ID to match.
The action indicates to add an S-tag before a C-tag or to replace the original C-tag by an
S-tag.
Enter the SP-VLAN ID.
Select the priority of the s-tag.
114