D-Link xStack Reference Manual page 49

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
To view this window, click System Configuration > Stacking > Stacking Mode Settings, as shown below:
The fields that can be configured or viewed are described below:
Parameter Description
Stacking Mode The stacking mode is disabled by default.
Force Master Use the radio buttons to enable or disable the function. It is used to ensure the master role
Role is unchanged when adding a new device to the current stacking topology. If the Enabled
radio button is selected, the master's priority will become zero after the stacking has
stabilized.
Stacking Trap Specifies that the traps will be sent for stacking.
State
Stacking Log Specifies that the logs will be sent for stacking.
State
Current Box ID
The Box ID of the switch in the stack to be configured.
New Box ID The new box ID of the selected switch in the stack that was selected in the Current Box ID
field. The user may choose any number between 1 and 12 to identify the switch in the
switch stack. Auto will automatically assign a box number to the switch in the switch stack.
Priority (1-63) Displays the priority ID of the Switch. The lower the number, the higher the priority. The
box (switch) with the lowest priority number in the stack is the Primary Master switch. The
Primary Master switch will be used to configure applications of the switch stack.
Click the Apply button to accept the changes made.
Management
Figure 3-203 Stacking Mode Settings window
48