Ddm Temperature Threshold Settings - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Trap State
Log State
Power Unit
Unit
From Port / To Port
State
Shutdown
Click the Apply button to accept the changes made for each individual section.

DDM Temperature Threshold Settings

This window is used to configure the DDM Temperature Threshold Settings for specific ports on the Switch.
To view the following window, click System Configuration > Port Configuration > DDM > DDM Temperature
Threshold Settings, as shown below:
Figure 3-4 DDM Settings window
Description
Specify whether to send the trap, when the operating parameter exceeds the alarm or
warning threshold.
Specify whether to send the log, when the operating parameter exceeds the alarm or
warning threshold.
Select the power unit used here. Options to choose from are mW and dBm.
Select the unit to be configured.
Select a range of ports to be configured.
Use the drop-down menu to enable or disable the DDM state
Specifies whether to shutdown the port, when the operating parameter exceeds the
Alarm or Warning threshold.
21