Lldp Dot1 Tlvs Settings - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
configured for an individual port or group of ports to exclude one or more of these data types from outbound LLDP
advertisements. The mandatory data type includes four basic types of information (end of LLDPDU TLV, chassis ID
TLV, port ID TLV, and Time to Live TLV). The mandatory data types cannot be disabled. There are also four data
types which can be optionally selected. These include Port Description, System Name, System Description and
System Capability.
To view the following window, click L2 Features > LLDP > LLDP> LLDP Basic TLVs Settings, as shown below:
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Port Description
System Name
System Description
System Capabilities
Click the Apply button to accept the changes made.

LLDP Dot1 TLVs Settings

LLDP Dot1 TLVs are organizationally specific TLVs which are defined in IEEE 802.1 and used to configure an
Figure 5-110 LLDP Basic TLVs Settings window
Description
Select the switch unit to configure.
Select the port range to use for this configuration.
Use the drop-down menu to enable or disable the Port Description option.
Use the drop-down menu to enable or disable the System Name option.
Use the drop-down menu to enable or disable the System Description option.
Use the drop-down menu to enable or disable the System Capabilities option.
173