®
xStack
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Switch supports jumbo frames with a maximum frame size of up to 13312 bytes.
To view the following window, click System Configuration > Port Configuration > Jumbo Frame Settings, as
shown below:
The fields that can be configured are described below:
Parameter
Jumbo Frame
Unit
From Port / To Port
State
Click the Apply button to implement changes made.
EEE Settings
Energy Efficient Ethernet (EEE) is defined in IEEE 802.3az. It is designed to reduce the energy consumption of a
link when no packets are being sent.
Figure 3-7. Jumbo Frame Settings window
Description
Use the radio buttons to enable or disable the Jumbo Frame function on the Switch. The
default is Disabled. When disabled, the maximum frame size is 1536 bytes. When
enabled, the maximum frame size is 13312 bytes.
Select the unit you wish to configure.
Select the appropriate port range used for the configuration here.
Use the drop-down menu to enable the Jumbo Frame for the port.
33