Mac Address Aging Time Settings - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
State
Interval (1-2147483647)
History Size (1-500)
Unit
From Port / To Port
State
Click the Apply button to accept the changes made for each individual section.

MAC Address Aging Time Settings

Users can configure the MAC Address aging time on the Switch.
To view the following window, click L2 Features > FDB > MAC Address Aging Time Settings, as shown below:
Figure 5-50 MAC Notification Settings window
Description
Enable or disable MAC notification globally on the Switch
The time in seconds between notifications. Value range to use is 1 to 2147483647.
The maximum number of entries listed in the history log used for notification. Up to
500 entries can be specified.
Select the unit you want to configure.
Select the starting and ending ports for MAC notification.
Enable MAC Notification for the ports selected using the drop-down menu.
132