D-Link xStack Reference Manual page 535

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Port
Time Interval
Record Number
64
65-127
128-255
256-511
512-1023
1024-1518
1519-1552
Figure 12-15 RX Size Analysis window (table)
Description
Use the drop-down menu to choose the port that will display statistics.
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Select number of times the Switch will be polled between 20 and 200. The default value
is 200.
The total number of packets (including bad packets) received and transmitted, that
were 64 octets in length (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received and transmitted, that
were between 65 and 127 octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets) received and transmitted, that
were between 128 and 255 octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets) received and transmitted, that
were between 256 and 511 octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets) received and transmitted, that
were between 512 and 1023 octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets) received and transmitted, that
were between 1024 and 1518 octets in length inclusive (excluding framing bits but
including FCS octets).
The total number of packets (including bad packets) received and transmitted, that
were between 1519 and 1552 octets in length inclusive (excluding framing bits but
534