Radius Authentication - D-Link xStack Reference Manual

Xstack ds-3620 series web ui reference guide layer 3 managed stackable gigabit switch
Hide thumbs Also See for xStack:
Table of Contents

Advertisement

®
xStack
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Parameter
Index
IPv4 Address
IPv6 Address
Authentication Port
(1-65535)
Accounting Port (1-65535)
Timeout (1-255)
Retransmit (1-20)
Key
Confirm Key
Click the Apply button to accept the changes made.

RADIUS Authentication

Users can display information concerning the activity of the RADIUS authentication client on the client side of the
RADIUS authentication protocol.
To view this window, click Security > RADIUS > RADIUS Authentication as shown below:
The user may also select the desired time interval to update the statistics, between 1s and 60s, where "s" stands
for seconds. The default value is one second.
The fields that can be configured are described below:
Parameter
InvalidServerAddr
Identifier
ServerIndex
Description
Choose the desired RADIUS server to configure: 1, 2 or 3 and select the IPv4
Address.
Set the RADIUS server IP address.
Set the RADIUS server IPv6 address.
Set the RADIUS authentication server(s) UDP port which is used to transmit
RADIUS data between the Switch and the RADIUS server.
Set the RADIUS account server(s) UDP port which is used to transmit RADIUS
accounting statistics between the Switch and the RADIUS server.
Set the RADIUS server age-out, in seconds.
Set the RADIUS server retransmit time, in times.
Set the key the same as that of the RADIUS server.
Confirm the key the same as that of the RADIUS server.
Figure 9-23 RAIUS Authentication window
Description
The number of RADIUS Access-Response packets received from unknown
addresses.
The NAS-Identifier of the RADIUS authentication client.
The identification number assigned to each RADIUS Authentication server that the
397

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack dgs-3620-28sc

Table of Contents