D-Link xStack Reference Manual page 181

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
NTCS
State
Click the Apply button to accept the changes made.
LLDP-MED Local Port Information
This window displays the per-port information currently available for populating outbound LLDP-MED
advertisements.
To view the following window, click L2 Features > LLDP> LLDP-MED > LLDP-MED Local Port Information, as
shown below:
Figure 5-120 LLDP-MED Port Settings window
Description
Select the switch unit to configure.
Select the port range to use for this configuration.
Use the drop-down menu to enable or disable Notification Topology Change
Status.
Use the drop-down menu to enable or disable transmit LLDP-MED TLVs, and tick
the check boxes of the TLV types that the LLDP agent should transmit. TLV types
are Capabilities, Network Policy, Power Pse, and Inventory. Tick the All check
box to select all TLV types.
180