D-Link xStack Reference Manual page 593

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
BGP bgpEstablishedNotification
bgpBackwardTransNotification
Stacking swUnitInsert
swUnitRemove
swUnitFailure
swUnitTPChange
swUnitRoleChange
VRRP vrrpTrapNewMaster
vrrpTrapAuthFailure
Port Security swL2PortSecurityViolationTrap
Safe Guard swSafeGuardChgToNormal
(2) macaddr
(3) portNumber
(4) agentGratuitousARPInterfaceName
The BGP established event is generated when
the BGP FSM enters the ESTABLISHED state.
Binding objects:
(1) bgpPeerRemoteAddr
(2) bgpPeerLastError
(3) bgpPeerState
The BGP established event is generated when
the BGP FSM enters the ESTABLISHED state.
Binding objects:
(1) bgpPeerRemoteAddr
(2) bgpPeerLastError
(3) bgpPeerState
Unit Hot Insert notification.
Binding objects：
(1) swUnitMgmtId.
(2) swUnitMgmtMacAddr.
Unit Hot Remove notification.
Binding objects：
(1) swUnitMgmtId.
(2) swUnitMgmtMacAddr.
Unit Failure notification.
Binding objects：
(1) swUnitMgmtId.
The stacking topology change notification.
Binding objects：
(1) swStackTopologyType
(2) swUnitMgmtId
(3) swUnitMgmtMacAddr
The stacking unit role change notification.
Binding objects：
(1) swStackRoleType
(2) swUnitMgmtId
The newMaster trap indicates that the sending
agent has transitioned to 'Master' state.
Binding objects:
(1) vrrpOperMasterIpAddr
A vrrpAuthFailure trap signifies that a packet
has been received from a router whose
authentication key or authentication type
conflicts with this router's authentication key or
authentication type. Implementation of this trap
is optional.
Binding objects:
(1) vrrpTrapPacketSrc
(2) vrrpTrapAuthErrorType
When the port security trap is enabled, new
MAC addresses that violate the pre-defined port
security configuration will trigger trap messages
to be sent out.
Binding objects：
(1)swPortSecPortIndex
(2)swL2PortSecurityViolationMac
This trap indicates system change operation
mode from axhausted to normal.
Binding objects:
(1) swSafeGuardCurrentStatus
592
1.3.6.1.2.1.15.0.1
1.3.6.1.2.1.15.0.2
1.3.6.1.4.1.171.12.11.2.2.1
.0.1
1.3.6.1.4.1.171.12.11.2.2.1
.0.2
1.3.6.1.4.1.171.12.11.2.2.1
.0.3
1.3.6.1.4.1.171.12.11.2.2.1
.0.4
1.3.6.1.4.1.171.12.11.2.2.1
.0.5
1.3.6.1.2.1.68.0.1
1.3.6.1.2.1.68.0.2
1.3.6.1.4.1.171.11.118.X.2.
100.1.2.0.2,(X:module ID)
1.3.6.1.4.1.171.12.19.4.1.0
.2