D-Link xStack Reference Manual page 235

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Stub Summary
Metric (0-65535)
Click the Apply button to accept the changes made.
Click the View Detail link to view a display of the OSPFv3 Area settings.
Click the Edit button to re-configure the selected entry.
Click the Delete button to remove the selected entry.
After click the View Detail
This window is used to display the OSPFv3 Area settings.
Click the <<Back button to return to the previous window.
OSPFv3 Interface Settings
This window is used to display the OSPFv3 configurations or OSPFv3 interfaces information.
To view the following window, click L3 Features > OSPF > OSPFv3 > OSPFv3 Interface Settings, as shown
below:
The fields that can be configured are described below:
Parameter
Interface Name
Click the Find button to find the interface entered.
Click the View All button to view all the interfaces configured on this Switch.
Click the Edit button to re-configure the selected entry.
After clicking the Edit button, the following window will appear.
When Stub is selected in the Type drop-down menu, use the drop-down menu to
specify whether the OSPFv3 stub area imports inter-area prefix LSA advertisements or
not.
Enter the default cost of OSPFv3 stub area.
link, the following window will appear.
Figure 6-58 OSPFv3 Area Settings - View Detail window
Figure 6-59 OSPFv3 Interface Settings window
Description
Enter the OSPFv3 IP interface name.
234