Ethernet Oam Configuration Settings - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Received Remote
Loopback
Click the Apply button to accept the changes made for each individual section.

Ethernet OAM Configuration Settings

This window is used to configure Ethernet OAM configuration settings.
To view this window, click OAM > Ethernet OAM > Ethernet OAM Configuration Settings, as shown below:
The fields that can be configured are described below:
Parameter
From Port / To Port
Link Event
Link Monitor
Threshold
Stop - Select to request the peer to change to the normal operation mode.
Use the drop-down menu to configure the client to process or to ignore the received
Ethernet OAM remote loopback command.
Process – Select to process the received Ethernet OAM remote loopback command.
Ignore - Select to ignore the received Ethernet OAM remote loopback command.
Figure 11-20 Ethernet OAM Configuration Settings window
Description
Select a range of ports you wish to configure.
Use the drop-down menu to select the link events, Link Monitor or Critical Link Event.
Use the drop-down menu to select link monitor. Available options are Error Symbol,
Error Frame, Error Frame Period, and Error Frame Seconds.
Enter the number of error frame or symbol in the period is required to be equal to or
515