D-Link xStack Reference Manual page 45

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
To add a new user, type in a User Name and New Password and retype the same password in the Confirm New
Password field. Choose the level of privilege (Admin, Operator, Power User or User) from the Access Right drop-
down menu.
Management
Configuration
Network Monitoring
Community Strings and Trap
Stations
Update Firmware and
Configuration Files
System Utilities
Factory Reset
User Account Management
Add/Update/Delete User Accounts
View User Accounts
The fields that can be configured are described below:
Parameter
User Name
Access Right
Encryption
Password
Confirm Password
Click the Apply button to accept the changes made.
NOTICE: In case of lost passwords or password corruption, refer to Error! Reference source not
found. which will guide you through the steps necessary to resolve this issue.
Figure 3-20. User Accounts Settings window
Admin
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Read/Write
Description
Enter a new user name for the Switch.
Specify the access right for this user.
Specifies that encryption will be applied to this account. Option to choose from are Plain
Text, and SHA-1.
Enter a new password for the Switch.
Re-type in a new password for the Switch.
Operator Power User
Read/Write– Read/Write–
partly partly
Read/Write Read-only
Read-only Read-only
No No
Read-only Read-only
No No
No No
No No
44
User
No
Read-only
Read-only
No
Read-only
No
No
No