Dhcpv6 Server - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
To view this window, click Network Application > DHCP > DHCP Server > DHCP Conflict IP as shown below:
Click the Clear All button to remove all the entries listed in the table.

DHCPv6 Server

DHCPv6 Server Global Settings
This command is used to enable the DHCPv6 server function on the Switch
To view this window, click Network Application > DHCP > DHCPv6 Server > DHCPv6 Server Global Settings
as shown below:
The fields that can be configured are described below:
Parameter
DHCPv6 Server Global
State
Click the Apply button to accept the changes made.
DHCPv6 Server Pool Settings
This window is used to create and configure a DHCPv6 pool.
To view this window, click Network Application > DHCP > DHCPv6 Server > DHCPv6 Server Pool Settings as
shown below:
The fields that can be configured are described below:
Parameter
Figure 10-17 DHCP Conflict IP window
Figure 10-18 DHCPv6 Server Global Settings window
Description
Click the radio buttons to enable or disable the DHCPv6 Server State.
Figure 10-19 DHCPv6 Server Pool Settings window
Description
482