Browse Vlan - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
VLAN Trunk State
Ports
Click the Apply button to accept the changes made for each individual section.

Browse VLAN

Users can display the VLAN status for each of the Switch's ports viewed by VLAN. Enter a VID (VLAN ID) in the
field at the top of the window and click the Find button.
To view the following window, click L2 Features > VLAN > Browse VLAN, as shown below:
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
NOTE: The abbreviations used on this page are Tagged Port (T), Untagged Port (U) and Forbidden
Port (F).
Figure 5-29 VLAN Trunk Settings window
Description
Select the unit you want to configure.
Enable or disable the VLAN trunking global state.
The ports to be configured. By clicking the Select All button, all the ports will be
included. By clicking the Clear All button, all the ports will not be included.
Figure 5-30 Browse VLAN window
110