D-Link xStack Reference Manual page 293

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Unsuppress Map
Action
Unsuppress Map
Name
Route Map Type
Route Map Action
Route Map Name
Click the Apply button to accept the changes made.
BGP Neighbor Filter Settings
This window is used to configure BGP neighbor filter settings.
To view the following window, click L3 Features > BGP > BGP Neighbor > BGP Neighbor Filter Settings, as
shown below:
The fields that can be configured are described below:
Parameter
IP Address
Peer Group Name
Filter List Type
Filter List Action
Filter List Name
Prefix List Type
Prefix List Action
Prefix List Name
Use the drop-down menu to select Add or Delete.
Enter the name of a route map used to selectively advertise routes previously
suppressed by the aggregate address command.
Use the drop-down menu to select In or Out. In specifies the incoming routes from
the neighbor and Out specifies the outgoing routes sent to the peer.
Use the drop-down menu to select Add or Delete.
Enter the route map to be applied to the incoming or outgoing routes.
Figure 6-155 BGP Neighbor Filter Settings window
Description
Click the radio button and use the drop-down menu to select the IP address of the BGP
speaking neighbor.
Click the radio button and use the drop-down menu to select the name of the BGP peer
group.
Use the drop-down menu to select In or Out to apply to either inbound or outbound traffic.
Use the drop-down menu to select Add or Delete.
Enter the name of an AS path access list to be applied as a filter. The filtering can be
applied to incoming routes or outgoing routes.
Use the drop-down menu to select In or Out to apply to either inbound or outbound traffic.
Use the drop-down menu to select Add or Delete.
Enter the name of a prefix list to be applied as a filter. The filtering can be applied to
incoming routes or outgoing routes.
292