D-Link xStack Reference Manual page 476

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
DHCP Relay Option
61 Default
Client ID
Relay Rule
Client ID
Click the Apply button to accept the changes made.
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specific entry based on the information entered.
Click the Delete All button to remove all the entries listed.
DHCP Relay Port Settings
This window is used to configure the state of the DHCP relay function for each port.
To view this window, click Network Application > DHCP > DHCP Relay > DHCP Relay Port Settings as shown
below:
Figure 10-7 DHCP Relay Option 61 Settings window
Description
Here the user can select the DHCP Relay Option 61 default action.
Drop – Specify to drop the packet.
Relay – Specify to relay the packet to an IP address. Enter the IP Address of the
default relay server. When there is no matching server found for the packet based on
option 61, the relay servers will be determined by this default relay server setting.
MAC Address – The client's client-ID which is the hardware address of client.
String – The client's client-ID, which is specified by administrator.
Drop – Specify to drop the packet.
Relay – Specify to relay the packet to an IP address.
MAC Address – The client's client-ID which is the hardware address of client.
String – The client's client-ID, which is specified by administrator.
475