Wred Profile Settings - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Profile
Click the Apply button to accept the changes made for each individual section.

WRED Profile Settings

This window is used to configure the WRED profile settings.
To view the following window, click QoS > WRED > WRED Profile Settings, as show below:
The fields that can be configured are described below:
Parameter
Profile ID (2-128)
Profile Name
Profile
Packet Type
Packet Colour
Use the drop-down menu to select the profile to be used for WERD ports and
queue.
Default – Specify the default profile to be used.
Profile ID – Select and enter a profile ID to be used.
Profile Name – Select and enter a profile name to be used.
Figure 7-11 WRED Profile Settings window
Description
Enter a WRED profile ID to be added or deleted.
Enter a WRED profile name to be added or deleted.
Use the drop-down menu to select the profile to be used for WRED ports and
queue.
Default – Specify the default profile to be used.
Profile ID – Select and enter a profile ID to be used.
Profile Name – Select and enter a profile name to be used.
Select the packet type, TCP or Non-TCP to be dropped.
Select the packet color, Green, yellow or red, to be dropped.
328