Upload Firmware To Http; Download Configuration; Download Configuration From Tftp - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Parameter
RCP Server IP
User Name
Source File
Destination File
Click Upload to initiate the upload.

Upload Firmware to HTTP

This window allows the user to upload firmware from the Switch to a HTTP Server.
The fields that can be configured are described below:
Parameter
Unit
Source File
Click Upload to initiate the upload.

Download Configuration

The following window is used to download the configuration file for the Switch.

Download Configuration from TFTP

This window allows the user to download the configuration file from a TFTP Server to the Switch and updates the
switch.
Description
Enter the RCP Server IP Address used.
Enter the appropriate Username used.
Enter the location and name of the Source File.
Enter the location and name of the Destination File.
Figure 13-10 Upload Firmware to FTP window
Description
Use the drop-down menu to select a unit for uploading the firmware.
Enter the location and name of the Source File.
Figure 13-11 Download Configuration File from TFTP window
555