Bgp Neighbor - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Click the <<Back button to return to the previous window.

BGP Neighbor

BGP Neighbor Group Settings
This window is used to configure a Border Gateway Protocol (BGP) neighbor group.
To view the following window, click L3 Features > BGP > BGP Neighbor > BGP Neighbor Group Settings, as
shown below:
The fields that can be configured are described below:
Parameter
Peer Group Name
IP Address
Remote AS Number
(1-4294967295)
Peer Group Name
Click the Add button to add a new entry based on the information entered in each individual section.
Figure 6-146 BGP Peer Group Settings - View Detail window
Figure 6-147 BGP Neighbor Group Settings window
Description
Enter the name of the BGP peer group.
Enter the IP address of the BGP speaking neighbor.
Click the radio button and enter the number of autonomous systems to which the peer
group belongs to. The range is from 1 to 4294967295.
Click the radio button and use the drop-down menu to select a name of the BGP peer
group.
286