Ssl Certification Settings - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Parameter
Server IP Address
Certificate File Name
Key File Nam
Click the Download button to download the SSL certificate based on the information entered.
NOTE: Certain implementations concerning the function and configuration of SSL are not available on
the web-based management of this Switch and need to be configured using the command line
interface.
NOTE: Enabling the SSL command will disable the web-based switch management. To log on to the
Switch again, the header of the URL must begin with https://. Entering anything else into the
address field of the web browser will result in an error and no authentication will be granted.

SSL Certification Settings

This window is used to configure the SSL certification settings
To view this window, click Security > SSL > SSL Certification Settings as shown below:
The fields that can be configured are described below:
Parameter
SSL Certification File
Name
SSL CA Chain
Configuration
Description
Enter the IPv4 address of the TFTP server where the certificate files are located.
Enter the path and the filename of the certificate file to download. This file must
have a .der extension. (Ex. c:/cert.der)
Enter the path and the filename of the key file to download. This file must have
a .der extension (Ex. c:/pkey.der)
Figure 9-79 SSL Certification Settings window
Description
Use the drop-down menu to select the SSL Certification File Name.
Enter the chain of certifications on the Switch. Click the Default button to use all the
certificates which were downloaded to the Switch to constitute a certificate chain.
457