Ipv6 Route Redistribution Settings (Ei Mode Only) - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Route Map Name
Click the Apply button to accept the changes made for each individual section.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
When selecting BGP as the Destination Protocol, the following window will be displayed. (EI Mode Only)
The fields that can be configured are described below:
Parameter
Destination Protocol
Source Protocol
Type
Metric (0-
4294967295)
Route Map Name
Click the Apply button to accept the changes made for each individual section.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.

IPv6 Route Redistribution Settings (EI Mode Only)

Here the user can configure the IPv6 route redistribution settings.
To view the following window, click L3 Features > Route Redistribution > IPv6 Route Redistribution Settings,
Enter a route map which will be used as the criteria to determine whether to
redistribute specific routes.
Figure 6-20 Route Redistribution Settings (BGP)
Description
Use the drop-down menu to select the destination protocol.
Use the drop-down menu to select the source protocol.
When OSPF is select as the Source Protocol, the following parameters will be
available for selection:
All - To redistribute both OSPF AS-internal and OSPF AS-external routes to RIP or
BGP.
Internal - To redistribute only the OSPF AS-internal routes.
External - To redistribute only the OSPF AS-external routes, including Ext Type1 and
Ext Type2 routes.
Ext Type1 - To redistribute only the OSPF AS-external type-1 routes.
Ext Type2 - To redistribute only the OSPF AS-external type-2 routes.
Inter-E1 - To redistribute only the OSPF AS-external type-1 and OSPF AS-internal
routes.
Inter-E2 - To redistribute only the OSPF AS-external type-2 and OSPF AS-internal
routes.
Enter the BGP metric value for the redistributed routes.
Enter a route map which will be used as the criteria to determine whether to
redistribute specific routes.
201