Application Authentication Settings; Accounting Settings - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Authentication Policy
Encryption
User Attempts (1-255)
Response Timeout
(0-255)
Click the Apply button to accept the changes made.

Application Authentication Settings

Users can configure Switch configuration applications (console, Telnet, SSH, web) for login at the user level and at
the administration level (Enable Admin) utilizing a previously configured method list.
To view this window, click Security > Access Authentication Control > Application Authentication Settings as
shown below:
The fields that can be configured or displayed are described below:
Parameter
Application
Login Method List
Enable Method
List
Click the Apply button to accept the changes made.

Accounting Settings

Users can configure the state of the specified RADIUS accounting service.
To view this window, click Security > Access Authentication Control > Accounting Settings as shown below:
Switch.
Use the drop-down menu to enable or disable authentication policy encryption.
Enter the maximum number of times that the Switch will accept authentication
attempts. Users failing to be authenticated after the set amount of attempts will be
denied access to the Switch and will be locked out of further authentication attempts.
Command line interface users will have to wait 60 seconds before another authentica-
tion attempt. Telnet and web users will be disconnected from the Switch. The default
setting is 3.
Enter the time that the Switch will wait for a response of authentication from the user.
The default setting is 30 seconds.
Figure 9-68 Application Authentication Settings window
Description
Lists the configuration applications on the Switch. The user may configure the Login
Method List and Enable Method List for authentication for users utilizing the Console
(Command Line Interface) application, the Telnet application, SSH, and the Web (HTTP)
application.
Use the drop-down menu to configure an application for normal login on the user level,
utilizing a previously configured method list. The user may use the default Method List or
other Method List configured by the user. See the Login Method Lists Settings window,
in this section, for more information.
Use the drop-down menu to configure an application to promote user level to admin-level
users utilizing a previously configured method list. The user may use the default Method
List or other Method List configured by the user. See the Login Method Lists Settings
window, in this section, for more information
446