D-Link xStack Reference Manual page 307

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Click the Edit button under Match Clause or Set Clause to configure the clause.
Click the Delete button to remove the specific entry.
Click the Edit button under Match Clause to see the following window.
The fields that can be configured are described below:
Parameter
Action
AS Path
Community List
IP Address List
IP Address Prefix
List
Next Hop List
Next Hop Prefix
List
Metric
(0-4294967294)
Route Type
Interface Name
Route Source
Click the Apply button to accept the changes made.
Click the <<Back button to return to the previous window.
Figure 6-178 Route Map Settings - Match Clause window
Description
Use the drop-down menu to Add or Delete a sequence entry.
Select the radio button and specify to match the AS path of the route against the AS path
list. The AS path list specified here needs to be a sub-list of the AS path list associated
with the route.
Select the radio button and specify to match the community of the route against the
community string. Tick the Exact check box to present all the specified communities.
Select the radio button and specify to match the route according to the access list.
Select the radio button and specify to match the route according to the prefix list.
Select the radio button and specify to match the next hop of the route according to the
prefix list.
Select the radio button and specify to match the next hop of the route according to the
prefix list.
Select the radio button and specify to match the metric of the route.
Select the radio button and select the route type for this entry. Options to choose from are
Internal, External, Type_1, and Type_2.
306