D-Link xStack Reference Manual page 528

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Port
Time Interval
Record Number
Bytes
Packets
Show/Hide
Click the Apply button to accept the changes made for each individual section.
Click the Clear button to clear all statistics counters on this window.
Click the View Table link to display the information in a table rather than a line graph.
Click the View Graphic
Errors
The Web manager allows port error statistics compiled by the Switch's management agent to be viewed as either a
line graph or a table. Four windows are offered.
Received (RX)
The cntMaxSize value is 1518, when the Jumbo Frame option is disabled. The MAXFRAME value is 1536 when
the Jumbo Frame option is disabled. When the Jumbo Frame op is enabled, the cntMaxSize and MAXFRAME
Figure 12-9 TX Packets Analysis window (table for Bytes and Packets)
Description
Use the drop-down menu to choose the port that will display statistics.
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Select number of times the Switch will be polled between 20 and 200. The default
value is 200.
Counts the number of bytes successfully sent on the port.
Counts the number of packets successfully sent on the port.
Check whether or not to display Bytes and Packets.
link to display the information in a line graph rather than a table.
527