Ssh User Authentication List - D-Link xStack Reference Manual
Xstack ds-3620 series web ui reference guide layer 3 managed stackable gigabit switch
Hide thumbs
Also See for xStack:
- Reference manual (1284 pages) ,
- User manual (357 pages) ,
- Hardware installation manual (71 pages)
Table of Contents
Advertisement
®
xStack
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
ARC4
Blow-fish CBC
Twofish128
Twofish192
Twofish256
Click the Apply button to accept the changes made.
The fields that can be configured for the Data Integrity Algorithm are described below:
Parameter
HMAC-MD5
HMAC-SHA1
Click the Apply button to accept the changes made.
The fields that can be configured for the Public Key Algorithm are described below:
Parameter
HMAC-RSA
HMAC-DSA
Click the Apply button to accept the changes made.
SSH User Authentication List
Users can configure parameters for users attempting to access the Switch through SSH. In the window above, the
User Account "username" has been previously set using the User Accounts window in the Configuration folder. A
User Account MUST be set in order to set the parameters for the SSH user.
To view this window, click Security > SSH > SSH User Authentication List as shown below:
The fields that can be configured or displayed are described below:
Use the check box to enable or disable the Arcfour encryption algorithm with Cipher
Block Chaining. The default is enabled.
Use the check box to enable or disable the Blowfish encryption algorithm with
Cipher Block Chaining. The default is enabled.
Use the check box to enable or disable the twofish128 encryption algorithm. The
default is enabled.
Use the check box to enable or disable the twofish192 encryption algorithm. The
default is enabled.
Use the check box to enable or disable the twofish256 encryption algorithm. The
default is enabled.
Description
Use the check box to enable or disable the HMAC (Hash for Message
Authentication Code) mechanism utilizing the MD5 Message Digest encryption
algorithm. The default is enabled.
Use the check box to enable or disable the HMAC (Hash for Message
Authentication Code) mechanism utilizing the Secure Hash algorithm. The default is
enabled.
Description
Use the check box to enable or disable the HMAC (Hash for Message
Authentication Code) mechanism utilizing the RSA encryption algorithm. The default
is enabled.
Use the check box to enable or disable the HMAC (Hash for Message
Authentication Code) mechanism utilizing the Digital Signature Algorithm (DSA)
encryption. The default is enabled.
Figure 9-82 SSH User Authentication List window
461
Advertisement
Table of Contents
