Port Error Disabled - D-Link xStack Reference Manual

Xstack ds-3620 series web ui reference guide layer 3 managed stackable gigabit switch

Hide thumbs Also See for xStack:

Table of Contents

DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide

The fields that can be configured are described below:

From Port / To Port

Click the Apply button to implement changes made.

Port Error Disabled

The following window displays the information about ports that have been disconnected by the Switch when a

packet storm occurs or a loop was detected.

To view the following window, click System Configuration > Port Configuration > Port Error Disabled, as

shown below:

Figure 3-12 Port Description Settings window

Select the unit you wish to configure.

Select the appropriate port range used for the configuration here.

Specify the medium type for the selected ports. If configuring the Combo ports, the

Medium Type defines the type of transport medium to be used, whether Copper or Fiber.

Users may then enter a description for the chosen port(s).