Ospf Neighbor Table - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide

OSPF Neighbor Table

This window is used to display OSPF-neighbor information on a per-interface basis.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPF Neighbor Table, as shown below:
The fields that can be configured are described below:
Parameter
Neighbor IP Address
Click the Find button to find the specified entry.
Click the View All button to view all the entries.
OSPF Virtual Neighbor Table
This window is used to display OSPF-neighbor information of OSPF virtual links.
To view the following window, click L3 Features > OSPF > OSPFv2 > OSPF Virtual Neighbor Table, as shown
below:
The fields that can be configured are described below:
Parameter
Transit Area ID
Virtual Neighbor
Router ID
Click the Find button to find the specified entry.
Click the View All button to view all the entries.
Figure 6-54 OSPF Neighbor Table window
Description
Enter the IP address of the neighbor router.
Figure 6-55 OSPF Virtual Neighbor Table window
Description
A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies
the OSPF area in the OSPF domain.
The OSPF router ID for the remote area. This is a 32-bit number in the form of an IP
address (xxx.xxx.xxx.xxx) that uniquely identifies the remote area's Area Border Router.
232