Upload Firmware; Upload Firmware To Tftp; Upload Firmware To Rcp - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide

Upload Firmware

The following window is used to upload firmware from the Switch.

Upload Firmware to TFTP

This window allows the user to upload firmware from the Switch to a TFTP Server.
The fields that can be configured are described below:
Parameter
Unit
TFTP Server IP
Destination File
Source File
Click Upload to initiate the upload.

Upload Firmware to RCP

This window allows the user to upload firmware from the Switch to a RCP Server.
The fields that can be configured are described below:
Figure 13-8 Upload Firmware to TFTP window
Description
Use the drop-down menu to select a unit for uploading the firmware.
Enter the TFTP server IP address used.
IPv4 Click the radio button to enter the TFTP server IP address used.
IPv6
Click the radio button to enter the TFTP server IPv6 address used.
Domain Name Click the radio button to enter the domain name.
Enter the location and name of the Destination File.
Enter the location and name of the Source File.
Figure 13-9 Upload Firmware to RCP window
554