D-Link xStack Reference Manual page 117

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Profile ID (1-4)
Click the Find button to locate the profile entered.
Click the Add QinQ Profile button to add a QinQ profile to the VLAN translation profile list.
Click the View All button to view all the configured profiles.
Click the Delete All button to delete all configured profiles.
Click the Show Match button to view the QinQ VLAN Translation Rule Information.
Click the Delete button to remove the specific entry.
After clicking the Add QinQ Profile button, the following page will be available:
The fields that can be configured are described below:
Parameter
Profile ID (1-4)
Rule ID (1-128)
Action
Figure 5-36 VLAN Translation Profile List window
Description
Enter the VLAN translation profile ID used here.
Figure 5-37 VLAN Translation Profile List window (Add QinQ Profile)
Description
Select the profile ID to configure
Enter the rule ID to be added to the profile. If the rule ID is not specified, it will be
assigned automatically.
Select the action that will be taken here. Options to choose from are Add and Replace.
Add specifies to add a tag for the assigned S-VLAN before the Outer-VLAN tag. If there
is an S-TAG in the packet, this rule will not take effect. Replace specifies to replace the
116