Time Range Settings; Port Group Settings - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Click the Apply button to accept the changes made.

Time Range Settings

Time range is a time period that the respective function will take an effect on, such as ACL. For example, the
administrator can configure the time-based ACL to allow users to surf the Internet on every Saturday and every
Sunday, meanwhile to deny users to surf the Internet on weekdays.
The user may enter up to 64 time range entries on the Switch.
To view the following window, click System Configuration > Time Range Settings, as shown below:
The fields that can be configured are described below:
Parameter
Range Name
Hours (HH MM SS)
Weekdays
Click the Apply button to accept the changes made. Current configured entries will be displayed in the Time
Range Information table in the bottom half of the window shown above.

Port Group Settings

This window is used to create port groups, and add or delete ports from the port groups.
To view the following window, click System Configuration > Port Group Settings, as shown below:
Information (6) and Debug (7).
Figure 3-17. Time Range Settings window
Description
Enter a name of no more than 32 alphanumeric characters that will be used to identify
this time range on the Switch. This range name will be used in the Access Profile table
to identify the access profile and associated rule to be enabled during this time range.
This parameter is used to set the time in the day that this time range is to be enabled
using the following parameters:
Start Time - Use this parameter to identify the starting time of the time range, in hours,
minutes and seconds, based on the 24-hour time system.
End Time - Use this parameter to identify the ending time of the time range, in hours,
minutes and seconds, based on the 24-hour time system.
Use the check boxes to select the corresponding days of the week that this time range
is to be enabled. Tick the Select All Days check box to configure this time range for
every day of the week.
42