Ptp Boundary Port Settings - D-Link xStack Reference Manual

Xstack ds-3620 series web ui reference guide layer 3 managed stackable gigabit switch

Hide thumbs Also See for xStack:

Table of Contents

DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide

Priority 1 (0-255)

Priority 2 (0-255)

Click the Apply button to accept the changes made.

PTP Boundary Port Settings

This window is used to configure the attributes of the PTP boundary clock. The configuration takes effect when the

PTP device is a boundary type.

To view this window, click L2 Features > PTP > PTP Boundary Port Settings, as shown below:

The fields that can be configured are described below:

From Port / To Port

This is used in the execution of the best master clock algorithm. Lower values take

precedence. The range is from 0 to 255. Zero indicates the highest precedence.

This is used in the execution of the best master clock algorithm. Lower values take

precedence. In the event that the operation of the BMC algorithm fails to order the

clocks based on the values of Priority1, the clock's class and the clock's accuracy; the

Priority 2 will allow the creation of lower values compared to the other devices. The

range is from 0 to 255. Zero indicates the highest precedence.

Figure 5-128 PTP Boundary Port Settings window

Select the switch unit to configure.

Select the port range to use for this configuration.

Xstack dgs-3620-28sc