D-Link xStack Reference Manual page 170
Xstack ds-3620 series web ui reference guide layer 3 managed stackable gigabit switch
Hide thumbs
Also See for xStack:
- Reference manual (1284 pages) ,
- User manual (357 pages) ,
- Hardware installation manual (71 pages)
Table of Contents
Advertisement
®
xStack
DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Parameter
R-APS VLAN
Ring Status
Admin West Port
Operational West Port
Admin East Port
Operational East Port
Admin RPL Port
Operational RPL Port
Admin RPL Owner
Operational RPL
Owner
Protected VLAN(s)
Ring MEL (0-7)
Holdoff Time (0-10000)
Guard Time (10-2000)
WTR Time (5-12)
Revertive
Current Ring State
Click the Apply button to accept the changes made.
Click the <<Back button to return to the previous window.
After clicking the
Sub-Ring Information
Description
Display the R-APS VLAN ID.
Tick the check box and use the drop-down menu to enable or disable the specified
ring.
Tick the check box and use the drop-down menu to specify the port as the west ring
port and also the virtual port channel used.
The operational west port value is displayed.
Tick the check box and use the drop-down menu to specify the port as the east ring
port and also the virtual port channel used.
Display the operational east port value.
Tick the check box and use the drop-down menu to specify the RPL port used.
Options to choose from are West Port, East Port, and None.
Display the operational RPL port value.
Tick the check box and use the drop-down menu to enable or disable the RPL
owner node.
Display the operational RPL owner value.
Tick the check box, click the Add or Delete radio button, and enter the protected
VLAN group.
Tick the check box and enter the ring MEL of the R-APS function. The default ring
MEL is 1.
Tick the check box and enter the hold-off time of the R-APS function. The default
hold-off time is 0 milliseconds.
Tick the check box and enter the guard time of the R-APS function. The default
guard time is 500 milliseconds.
Tick the check box and enter the WTR time of the R-APS function.
Tick the check box and use the drop-down menu to enable or disable the state of
the R-APS revertive option.
Display the current Ring state.
link, the following window will appear:
Figure 5-106 ERPS Settings (Sub-Ring Information) window
169
Advertisement
Table of Contents
