D-Link xStack Reference Manual page 547

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
IPv4 Address / IPv6
Address
Domain Name
TTL (1-60)
Port (300000-64900)
Timeout (1-65535)
Probe (1-9)
Click the Start button to initiate the Trace Route.
After clicking the Start button, the following page will appear:
Figure 12-29 Trace Route window
Description
IP address of the destination station.
The domain name of the destination end station.
The time to live value of the trace route request. This is the maximum number of
routers that a trace route packet can pass. The trace route option will cross while
seeking the network path between two devices.
The range for the TTL is 1 to 60 hops.
The port number. The value range is from 30000 to 64900.
Defines the timeout period while waiting for a response from the remote device. A
value of 1 to 65535 seconds can be specified. The default is 5 seconds.
The number of probing. The range is from 1 to 9. If unspecified, the default value is 1.
546