Appendix C - Trap Entries - D-Link xStack Reference Manual

®
xStack DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch Web UI Reference Guide
Appendix C – Trap Entries
This table lists the trap logs found on the Switch.
Category Trap Name
MAC Notification swL2macNotification
MAC-based Access
swMacBasedAccessControlLoggedSu
Control
ccess
swMacBasedAccessControlLoggedFail The trap is sent when a MAC-based Access
swMacBasedAccessControlAgesOut
PIM6 pimNeighborLoss
pimInvalidRegister
pimInvalidJoinPrune
pimRPMappingChage
Description
This trap indicates the MAC addresses variation
in address table
Binding objects:
(1)swL2macNotifyInfo
The trap is sent when a MAC-based Access
Control host is successfully logged in.
Binding objects：
(1) swMacBasedAuthInfoMacIndex
(2) swMacBasedAuthInfoPortIndex
(3) swMacBasedAuthVID
Control host login fails.
Binding objects：
(1) swMacBasedAuthInfoMacIndex
(2) swMacBasedAuthInfoPortIndex
(3) swMacBasedAuthVID
The trap is sent when a MAC-based Access
Control host ages out.
Binding objects：
(1) swMacBasedAuthInfoMacIndex
(2) swMacBasedAuthInfoPortIndex
(3) swMacBasedAuthVID
A pimNeighborLoss notification signifies the loss
of an adjacency with a neighbor. This
notification should be generated when the
neighbor timer expires, and the router has no
other neighbor on the same interface with the
same IP version and a lower IP address than
itself.
This notification is generated whenever the
counter pimNeighborLossCount is incremented,
subject to the rate limit specified by
pimNieghborLossNotificationsPeriod.
Binding objects:
(1) pimNeighborUpTime
A pimInvalidRegister notification signifies that an
invalid PIM Register message was received by
this device.
This notification is generated whenever the
counter pimInvalidRegisterMsgsRcvd is
incremented, subject to the rate limit specified
by pimInvalidRegisterNotificationPeriod.
Binding objects:
(1) pimGroupMappingPimMode
(2) pimInvalidRegisterAddressType
(3) pimInvalidRegisterOrigin
(4) pimInvalidRegisterGroup
(5) pimInvalidRegisterRp
A pimInvalidJoinPrune notification signifies that
an invalid PIM Join/Prune message was
received by this device.
This notification is generated whenever the
counter pimInvalidJoinPruneMsgsRcvd is
incremented, subject to the rate limit specified
by pimInvalidJoinPruneNotificationPeriod.
Binding objects:
(1) pimGroupMappingPimMode
(2) pimInvalidJoinPruneAddressType
(3) pimInvalidJoinPruneOrigin
(4) pimInvalidJoinPruneGroup
(5) pimInvalidJoinPruneRp
(6) pimNeighborUpTime
A pimRPMappingChange notification signifies a
change to the active RP mapping on this device.
This notification is generated whenever the
counter pimRPMappingChangeCount is
590
OID
1.3.6.1.4.1.171.11.118.X.2.
100.1.2.0.1 (X:module ID)
1.3.6.1.4.1.171.12.35.11.1.
0.1
1.3.6.1.4.1.171.12.35.11.1.
0.2
1.3.6.1.4.1.171.12.35.11.1.
0.3
1.3.6.1.2.1.157.0.1
1.3.6.1.2.1.157.0.2
1.3.6.1.2.1.157.0.3
1.3.6.1.2.1.157.0.4