Web-Ui Window View; Figure 3.4 Mmb Web-Ui [Login] Window; Table 3.6 Default User Account/Password - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation
3.3 Connection and Setting of MMB
Remark
At the time of initial start-up and if the settings have not been changed, following default user account and password
are applicable.
Username
Password
● Logout
Click [Logout] on the Navigation Bar.
→ Log out from Web-UI.

3.3.5 Web-UI Window View

For details on Web-UI window view, see "Chapter 1 Web-UI Overview" of PRIMEQUEST 2000 Series User Interface
Operating Instructions (CA92344-0538)
Remark
When [Read Error] is displayed on Web-UI Window, confirm the contents by referring to "11.2Troubleshooting" of
PRIMEQUEST 2000 series Administration Manual (CA92344-0537). In spite of referring to the manual, if the error cannot
be resolved, recurs, contact repairs inquiry counter or a sales representative.
Before making contact, confirm the model name and serial number shown on the label on the device and communicate the
same.
Basic operations in MMB Web-UI
The flow of basic operations is as follows.
1. The Menu is selected from Navigation Bar.
MMB Web-UI [Login] Window
FIGURE 3.4

TABLE 3.6 Default user account/password

Administrator
Password set up by the field engineer when setting a device
17
CA92344-0536-01