Enabling Access Gateway Mode Using Web Tools - Fujitsu PRIMERGY BX900 Quick Start Manual

Enabling Access Gateway mode using Web Tools

Complete the following steps to enable Access Gateway mode using Web Tools.
1. Open a Web browser from the management console.
2. Enter the IP address of the Embedded Switch Module into the Address field of the Web browser.
See the Web Tools Administrator's Guide for more information on using Web Tools.
3. Log into Web Tools using the default administrative account.
Login: admin
Password: password
4. Select the Embedded Switch Module from the fabric tree.
The selected Embedded Switch Module appears in the Switch View.
5. Click the Switch Admin button in the WebTools Manage taskbox.
The Switch Administration window opens.
NOTE
You should save the configuration file if you are converting an Embedded Switch Module to Access Gateway
mode. To save your current configuration, click the Show Advanced Mode button in the top right-hand corner of
the Switch Administration window. Select the Configure tab, then select the Upload/Download tab. Enter the
relevant information to upload the configuration file.
6. From the Switch Status section, click Disable.
7. From the Access Gateway Mode section, click Enable.
8. Click Apply.
9. When prompted, click Yes to restart the Embedded Switch Module in Access Gateway mode.
The current Web Tools session closes; relaunch Web Tools after the Embedded Switch Module reboots.
18 of 20 Brocade 5450 Embedded Switch Module QuickStart Guide
Publication Number: 53-1001265-02