Handling The Memory Slot Air Ducts - Fujitsu PRIMERGY CX2550 M6 Upgrade And Maintenance Manual

Installing a dummy riser module
▶ Install the riser dummy module in the same way as a riser module, see
"Installing a riser module" on page
Removing a dummy riser module
▶ Remove the riser dummy module in the same way as a riser module, see
"Removing a riser module" on page 49
4.6

Handling the memory slot air ducts

Removing the memory slot air ducts for air cooling
Figure 13: Removing the cables around the air duct
▶ If there are cables routed into the gap between the heat sink and the air
duct, remove the cables.
Figure 14: Removing the air duct
51.
Upgrade and Maintenance Manual
Basic hardware procedures
53