Installing A Controller (Pci Slot 5) - Fujitsu PRIMERGY TX200 S2 Options Manual

Installing a controller (PCI slot 5)

8.2 Installing a controller (PCI slot 5)
V
CAUTION!
In PCI slot 5 it is obligatory to install the pull-out aid for cooling reasons.
Ê Open the server as described in the
1
Figure 48: Removing the pull-out aid
Ê Push the green fastening slider toward the rear (1).
Ê Remove the pull-out aid (2).
60
chapter "Preparation" on page
2
Options Guide
Controller in the PCI slots
U41593-J-Z156-2-76
19ff.