Modular Lan Controller In Pci Slot 1 - Fujitsu PRIMERGY TX300 S7 Upgrade And Maintenance Manual

Ê If applicable, reconfigure your network settings in the operation system
according to the original configuration of the replaced controller (expansion
card or onboard).
I
Configuration of network settings should be performed by the
customer.
For further information, please refer to section
settings recovery" on page
Ê If applicable, restore LAN teaming configurations as described in section
"After replacing / upgrading LAN controllers" on page
9.3

Modular LAN controller in PCI slot 1

I
PCI slot 1 is the preferred slot for Modular LAN controllers with NCSI
connector.
Figure 268: Modular LAN controller D2755
TX300 S7 / RX350 S7
423.
Upgrade and Maintenance Manual
Expansion cards and backup units
"Note on network
166.
427