Setting A Partition Name; Figure 3.27 Bluescreentimeout Setting ([Misc] Settings) - Fujitsu PRIMEQUEST 1000 Series Installation Manual

PRIMEQUEST 1000 Series Installation Manual
CHAPTER 3 Work before Operating System Installation

FIGURE 3.27 BlueScreenTimeout setting ([Misc] settings)

For details on the vSphere Client, see the manual of VMware.
3.4.4

Setting a partition name

Set the name for a partition. You can set it with Administrator privileges.
If the specified name is the same as the specified host name of the operating system, the partition is easy to recognize.
Operations
1. Click [Partition] - [Partition Configuration].
>> The [Partition Configuration] window appears. For details on the [Partition Configuration] window, see
1.3.4 [Partition Configuration] window in the PRIMEQUEST 1000 Series Tool Reference (C122-E110EN).
51 C122-E107-09EN