▼ To Download Patches
1. Determine whether the patches you require have been installed on your
system. For example, using the showrev command, type the following for each
patch number:
# showrev -p | grep "Patch: 123456"
If you see patch information listed for the queried patch, and the dash
■
extension (the last two digits) matches or exceeds the required version, your
system has the proper patches already installed. No further action is required.
For example, if patch 123456-16 or later is installed, your system has the
required version of this patch.
If you do not see patch information listed for the queried patch, or if the dash
■
extension precedes the required version, go to
For example, if no version of the 123456 patch, or a version with an extension
of -15 or earlier is installed, you must download and install the new patch.
2. Access the above-mentioned web site to download the patches.
3. Follow the installation instructions provided in a specific patch's README file.
Installing the Solaris 10 8/07 OS and Required
Patches
In order to install the Solaris 10 8/07 OS, you must build an install image with the
correct patches applied. Use the following procedure to install the Solaris 10 8/07 OS
onto your system.
▼ Install the Solaris 10 8/07 OS and Required Patches
You must download all the patches listed in
Solaris 10 8/07 OS" on page 17
1. Copy the following patches to a location accessible by the netinstall server:
119254-51 or later
■
124235-02 or later
■
125369-13
■
125416-06
■
125476-02
■
Chapter 2
"Mandatory Patch Information for the
before performing this procedure.
Important Information About the SPARC Enterprise T5440 Server
Step
2.
19