Cutoff Characteristics Of Distribution Panel (At The Time Of Connecting Power Distribution Box); Table 2.5 Characteristic Condition Of Distribution Panel Breaker - Fujitsu PRIMEQUEST 2000 Series Hardware Installation Manual

CHAPTER 2 Connected Information

2.6 Cutoff Characteristics of Distribution Panel (At the time of connecting power distribution box)

Remarks
The above figure shows an example of 19-inch rack made by Fujitsu Limited mounted with the device.
2.6 Cutoff Characteristics of Distribution Panel (At the time
of connecting power distribution box)
At the time of connecting the distribution panel through power distribution box, protection should be
coordinated so that the breaker of the device (or power distribution box) trips before the breaker of the
distribution panel trips. Such protection should be maintained. Therefore, the distribution panel should have
the characteristic conditions shown in
It is necessary to use Distribution panel Breaker suitable to these conditions.

TABLE 2.5 Characteristic Condition of Distribution Panel Breaker

Power input
AC200 - 240 V
Cutoff characteristic is Long-time delay type and the cutoff characteristic equivalent to D (IEC898or IN0641
part II) shown in
slower than these characteristics is used.
Number
(1) Free access floor
(2) 200 mm (9.8 in)
(3) 300 mm (11.8 in) or more
(4) Recipient power distribution
"TABLE 2.5 Characteristic Condition of Distribution Panel
Device Name
Power distribution box
"FIGURE 2.28 Characteristics of Breaker of Distribution
Download from Www.Somanuals.com. All Manuals Search And Download.
Description
Breaker capacity of Distribution panel Breaker
For Japan/general
overseas/North America
30A
Panel" or cutoff characteristics
32
Breaker".
For Europe
32A
C122-H007-01EN