Figure 3.11 Example Of [Alarm E-Mail Filtering Condition] Window - Fujitsu PRIMEQUEST 2000 Series Installation Manual

CHAPTER 3 Work before Operating System Installation
3.3 Connection and Setting of MMB
- from [Network Configuration]-[Network Interface].
3. The operation button is clicked depending upon the purpose.
- When the condition for transmission of mail is set up: [Filter] Button
- When the settings are to be enabled: [Apply] Button
- During Test transmission: [Test E-Mail] Button
Setting the conditions for transmission of mail
1. To set the conditions for transmitting the mail, click [Filter] button on [Alarm E-Mail] window.
FIGURE 3.11
2. Select required items. When multiple items are selected, each item is AND condition, when multiple options are
selected in each item, it is OR condition.
3. Click [Apply] Button.
Example of [Alarm E-Mail Filtering Condition] Window
25
CA92344-0536-01